Industrial RS-485/RS-422 Converter/Repeater
Ex Tax: $39.00
- Stock: In Stock
- Model: CATAL‐4022
The CATAL- 4022 is a compact, rugged, industrial grade bi-directional RS-485/RS-422 converter. It converts a two-wire RS-485 signal into a four-wire RS-422 signal, and vice versa.
This converter can also work as RS-485 or RS-422 repeater to extend the RS-485 or RS-422 distance to up to 1.2km (4000 ft).
It supports data direction auto-turnaround, and therefore, no software drivers or fl ow control is required. This make the device fully plug-and play.
The unit is powered by an external 5VDC power supply The CATAL- 4022 has two db-9 male connectors, one for each RS-485/RS-422 side.
|Compatibility||EIA/TIA, RS-485 and RS-422 standard|
|Data Rate||Up to 115.2 kbps|
|Distance||RS-485/RS-422 side: Up to 4000ft (1.2km) at 19,200bps|
|Connector||RS-485/RS-422 side: DB-9 male and Termination Board supplied with DB-9 Female and a 6-Way Terminal Block.|
|End-of-Line Terminator||120ꭥ (built-in, selectable by Termination Board).|
|Static Protection (ESD)||Up to 15KV|
|Power||Ex. power supply: +5VDC (±5%) Regulated Power Supply (not included).|
|Housing||Rugged ABS ( can be metal on request).|
|Dimensions (L x W xH)||Without Termination Board: 63.0 mm X 33.5 mm X 16.8 mm (2.48” X 1.31” X 0.66”).With Termination Board: 91.3 mm X 33.5 mm X 16.8 mm (3.59” X 1.31” X 0.66”).|
|Temperature Rating||-40° C to 85° C (-40°F to 185° F).|
|Weight||Without Termination boards : 28 g.|
|RS-485/422 Pin Out - DP9 Male||RS-485/422 Pin Out - DP9 Male