- Stock: In Stock
- Model: CATAL‐4016
The CATAL- 4016 is an industrial-grade RS-485/RS-422 to 5V TTL converter. It converts a two-wire RS-485 signal (half - duplex) or a four-wire RS-422 signal (full-duplex) to a 5V TTL signal, and vice versa. The unit is powered from an external 5VDC power supply. External power supply reverse polarity protection is applied. The unit supports data direction auto-turnaround, and therefore, no software drivers or flow control is required.
|Compatibility||EIA/TIA RS-485 and RS-422 standard and TTL 5VDC|
|Data Rate||Up to 115.2 kbps|
|Distance||TTL side: Up to 10ft (3m).RS-485/RS-422 side: Up to 4000ft (1.2km) at 19,200bps.|
|Connector||TTL side: DB-9 male and Termination Board supplied with DB-9 Female and a 4-Way Terminal Block.RS-485/RS-422 side: DB-9 male and Termination Board supplied with DB-9 Female and a 6-Way Terminal Block.|
|End-of-Line Terminator||End-of-Line Terminator: 120ꭥ (built-in, selectable by Termination Board)|
|Static Protection (ESD)||Up to 15KV|
|Power||Ex. power supply: +5VDC (±5%) Regulated Power Supply (not included).|
|Housing||Rugged ABS ( can be metal on request)|
|Dimensions (L x W xH)||Without Termination Board: 63.0 mm X 33.5 mm X 16.8 mm (2.48” X 1.31” X 0.66”).With Termination Board: 91.3 mm X 33.5 mm X 16.8 mm (3.59” X 1.31” X 0.66”).|
|Temperature Rating||-40° C to 85° C (-40°F to 185° F).|
|Weight||Without Termination board : 28 g|
- Plug - and - Play
- Data direction auto-turnaround, no software drivers or flow control is required.
- Built-in 120ꭥ end-of-line terminator selectable.
- External power 5Vdc can be applied.
- External power supply reverse polarity protection.
- Two years warranty