CATALYST

The CATAL‐3211 is a microcontroller board based on the Microchip PIC32MX795F512L, a member of the 32‐bit PIC32 microcontroller family. The CATAL‐3211 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems. It features a USB seri..

The CATAL‐1801 is a microcontroller board based on the Microchip Low range family, a member of the 8‐bit PIC microcontroller family. The CATAL‐1801 is easy to use and suitable for both beginners and advanced users experimenting with electronics and embedded control systems. It features a USB se..

..

The CATAL- 4015 is an industrial-grade RS-232 to 5V TTL converter. It converts TX and RX of RS-232 lines to a 5V TTL signal and vice versa. It supports data direction auto-turnaround, and therefore, no software drivers or flow control is required. The unit can be powered from the RS-232 port or from..

The CATAL- 4018 is an industrial-grade RS-232 to RS-485/RS-422 converter. It converts TX and RX of RS-232 lines to a two-wire RS485 signal (half - duplex) or a four-wire RS-422 signal (full-duplex), and vice versa. The unit can be powered from the RS-232 port or from an external 5VDC power supply. I..

The CATAL- 4016 is an industrial-grade RS-485/RS-422 to 5V TTL converter. It converts a two-wire RS-485 signal (half - duplex) or a four-wire RS-422 signal (full-duplex) to a 5V TTL signal, and vice versa. The unit is powered from an external 5VDC power supply. External power supply reverse polarity..

The CATAL- 4022 is a compact, rugged, industrial grade bi-directional RS-485/RS-422 converter. It converts a two-wire RS-485 signal into a four-wire RS-422 signal, and vice versa.This converter can also work as RS-485 or RS-422 repeater to extend the RS-485 or RS-422 distance to up to 1.2km (4000 ft..

CATAL-4025 USB-to-serial converter provides an external plug and play RS-232 serial communication for computers, laptops, and handheld computing devices that support the USB specification. It comes with a standard DB-9 male connector for the peripherals to plug into, and attached 1 m USB cable with ..

The CATAL- 4021 is an industrial-grade USB to RS-485/RS-422 converter. It converts USB lines to a two-wire RS-485 signal (half - duplex) or a four-wire RS-422 signal (full-duplex), and vice versa. The unit powered from the USB port. It supports data direction auto-turnaround, and therefore, no soft..